This is an attachment that bolts along the front side of the upper deck. It allows for pliers and tweezers to easily hang so you can view them all, and...
This is a hook attachment for your Field Bench. You can add as many as you want, so that you may customize your upper deck for your tinkering needs. It...
This is a tablet or document shelf attachment for our Field Bench. It pops in the back rail of the field bench and can be mounted anywhere along the length of...
This is a simple, yet effective storage solution for your cable and wire spools. It works perfect for 9" diameter spools, or less. We sized the slots to accommodate a...
This attachment holds a set of 10 small wrenches, and attaches with two bolts. Add one for SAE and one for Metric, to complete your deck! We used these wrenches...
This is a simple, yet effective storage solution for your cable and wire spools. It works perfect for 5" diameter spools, or less. We sized the slots to accommodate a...
This is a 1/4" socket organizer attachment for our Field Bench. It can attach anywhere on the upper deck, with two bolts. It is the perfect attachment to organize a 1/4" socket set...
Introducing: the RC Spire. This versatile stand was engineered to be the pillar of your RC collection. With its sturdy design, and simple construction and modularity, it is effortless to customize...
If you are looking for a proper timing bridge, that is compatible with your RCP foam track and EasyLap or I-Lap timing system, this bridge is just what you are...
This attachment allows you to add a KSGER or Quicko, T12 soldering station off to the right side of your upper deck. It conveniently tucks it out of the way, so...
We were tired of working on our personal rigs on readily available RC repair stands, so we came up with this design. The design is based around a camera ball...
This attachment allows you to keep your charged AAA batteries up and out of the way, but easily within sight so that you can see how many charged batteries are...
We decided to design this Field Bench to be more specific to the Kyosho Mini-Z, and other 1/28 scale RC cars. This workstation is based on our medium size Field Bench,...
The Spire is a great storage solution for your gamut of RC vehicles. These optional feet allow your Spire to stand, on its own, on any flat surface. We offer...
The Spire's shelves are very stable, but can be somewhat slick, due to the powder coated finish. These foam pads make for a pliable, and very sticky surface to allow...
This is a simple, yet effective storage solution for your air tools. We have made them in a few different sizes to meet your needs. 4 slot hanger - Measures...
This attachment allows you to quickly hook a battery bank on the backside of your upper deck. With this, you may provide a longer runtime for your lighting, or run...
The Spire's shelves are very stable, but are sized for typical 1/10 scale vehicles. If mini RCs are to be stored, this optional shelf add on will securely store mini RCs....
Tired of spray cans and spray bottles accumulating all over your workspace? This is the perfect solution to tidy up your shop. Constructed of a thick gauge steel and optionally...
The Spire can be used as a permanently wall-mounted storage rack, but if you want a simple solution to make your Spire easy to install on the wall, but easily...
The Spire's is a great storage solution for your gamut of RC vehicles. If you have purchased the optional feet, this Foot Tray will bolt right to them, and add a platform...
The Spire's shelves are very stable, but RC Crawlers tend to be unstable on smaller platforms. These Crawler Cradles offer a perfect nest for your 1/10 scale crawler. With a rubber...
These legs allow you to use your Field Bench upper deck as a wall-mounted tool organizer, without the lower tray. This is the perfect organizer for your permanent workstation, or...
If you purchased one of our Field Benches, and are looking to swap to a "Model Building" top, this includes everything you need to convert over. It includes the upper...
This attachment provides 17 slots to store your jumper wires for your circuit board prototyping. This conveniently keeps them off the works surface, and organized within arms reach.
This suspension platform is sized to fit either a Creality K1 or K1 max, with the Creality-provided rubber feet that come with your 3D Printer. The platform is made from...
This attachment provides slots to hang your Arteza Paint tubes from. They come in varying widths, as explained below:- Full Width - This expands the entire middle width of your top deck,...
Details:- Sturdy, Durable Baltic Birch Construction- CNC cut for consistent product quality, and hand finished to polish - The lap desks may be ordered in both unfinished or clear coated...
These legs allow you to use your Field Bench upper deck as a standalone tool organizer, without the lower tray. This is the perfect organizer for your permanent workstation, or...
Jack stands are very important when lifting a vehicle for maintenance. The problem is, they are extremely awkward to store. Often they collect in a corner or in random places...
Looking to personalize your Field Bench even more? We offer these protective vinyl wraps to not only protect your work surface, but also add a little more flair to your...
If you are looking to add more shelving to your Spire Hobby Stand, we offer them in both a fixed, non-folding version, as well as a folding version. Our folding...